Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9657537
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > Supply capacity outside micrometer 0-25mm0.01 micrometer caliper measurement macro mechanical screw micrometer
Supply capacity outside micrometer 0-25mm0.01 micrometer caliper measurement macro mechanical screw micrometer
Information Name: | Supply capacity outside micrometer 0-25mm0.01 micrometer caliper measurement macro mechanical screw micrometer |
Published: | 2013-08-01 |
Validity: | 30 |
Specifications: | 0-25mm |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | A mechanical micrometer, micrometer features 1) a higher accuracy than the vernier caliper; specifications of a wide range of manufacturing difficulties. Two, micrometer structures as shown for indexing micrometer diameter, and its structure is dominated by the fixed sleeve 2-foot frame 1, the differential cylinder 9, micrometer screw 6 and force ratchet 13 and the like. Third, the principle micrometer micrometer reticle principle: Activities sleeve is rotated 360 degrees, moving 0.5 mm in the axial direction. The activities are divided into 50 small cell sleeve, etc., each small grid as: 0.5/50 = 0.01 mm, the minimum measurement accuracy of 0.01 mm. Four, micrometer readings micrometer reading as follows: (a) read out activities in a fixed sleeve on the left end line on the sleeve scale; (2) the activities of which a mark on the sleeve and the sleeve fixed zero reference line alignment, read-out scale; (3) the sum of these two scale readings. V. micrometer proper use and maintenance 1 Check the zero line is accurate; 2. Measurement is required to clean the surface of the workpiece to be measured; 3. Workpiece should be placed in a large V-shaped iron or plate measurement; 4. Measurement before the measuring rod and the anvil clean; 5. Tighten activity sleeve ratcheting device required; 6 Do not unscrew the back cover, so as to avoid the zero line change; 7 Do activities in a fixed sleeve and joined between the sleeve Normal oil; 8 after use wipe oil, add special box, placed in a dry place |
Admin>>>
You are the 6471 visitor
Copyright © GuangDong ICP No. 10089450, Original product Electronic City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 6471 visitor
Copyright © GuangDong ICP No. 10089450, Original product Electronic City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility